Microprocessor Trainer Kit Manufacturer,Supplier and Exporter in India
Product Code : EL-EELE-11325
Quick Answer: The Microprocessor Trainer Kit is a single-board system with its CPU running at 6.144 MHz, a 16K-byte monitor program in EPROM and 8K bytes of battery-backed RAM, programmed from an ASCII keyboard or over a PC serial link.
Last updated: October 2026
Key Features
16K-byte monitor in a 27512 EPROM; 8K-byte 6264 RAM with NiCd battery backup; one expansion up to 56KB.
48 I/O lines from two 8255 chips on a 26-pin FRC connector.
Three-channel 8253 timer/counter on a 10-pin FRC connector.
Address, data and control lines brought out on a 50-pin FRC bus connector.
Backlit alphanumeric LCD (20x2, 20x4 or 40x2) and a 101-key ASCII keyboard interface.
Single-line assembler/disassembler, single stepping, breakpoints and block move commands.
Technical Specifications
| Specification | Value |
|---|---|
| CPU clock | 6.144 MHz |
| Monitor program | 16K bytes, 27512 EPROM |
| RAM | 8K bytes, 6264, NiCd battery backup |
| Memory expansion | Up to 56KB on board |
| I/O | 48 lines via 2 x 8255 |
| Timer/counter | 3 channels, 8253 |
| Display | 20x2/20x4/40x2 alphanumeric LCD, backlit |
| Built-in power supply | +5V/1.5A, +/-12V/250mA |
| Size (L x W x H) | 270 x 185 x 105 mm |
| Weight | 3 kg |
About This Product
Students write and test low-level programs on the board itself, keying code in through the ASCII keyboard or sending files from a PC over the serial link. Monitor commands let them examine and edit memory and registers, step through a program and move, insert or delete blocks of data, while the FRC connectors carry the I/O, timer and bus lines out to interfacing modules.
Frequently Asked Questions
How is the trainer programmed?
There are two command modes, ASCII keypad mode and serial mode. Files can be downloaded from or uploaded to a PC, and the monitor commands work through either the keyboard or the PC serial link.
What memory does it have?
A 16K-byte monitor program in a 27512 EPROM, 8K bytes of 6264 RAM with NiCd battery backup, and provision for one memory expansion up to 56KB.
Does it need an external power supply?
No. A power supply of +5V/1.5A and plus or minus 12V/250mA is built in.
Related: Electronics Engineering Lab Equipments, Computer Interface Trainer & Modules, Digital Signal Processor Trainer, Basic Electronic Trainer.
For a quotation on the Microprocessor Trainer Kit, contact Educational Lab Equipments.
