Electrical Circuit Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-EELE-11310
Quick Answer: The Electrical Circuit Trainer carries component symbols and electrical diagrams on its front panel and is used to check the main laws and principles of circuits. It includes a single-phase transformer with 6, 12 and 24 V AC outputs, moving iron meters, resistors, capacitors, inductances, diodes and a relay.
Last updated: October 2026
Key Features
Front panel printed with component symbols and electrical diagrams.
Single-phase transformer, 115–230 V / 6, 12, 24 V AC, 1 A.
Moving iron ammeter (0.5–1 A) and moving iron voltmeter (25 V).
10 resistors, a 100 ohm/25 W linear rheostat and four 6 A, 100 V diodes.
Capacitors of 100 and 500 microfarad at 25 V DC, and two 60 mH, 0.5 A inductances.
Two 24 V signalling lamps, a 24 V AC buzzer, push-buttons and a relay with two exchange contacts.
Technical Specifications
| Specification | Value |
|---|---|
| Transformer | Single phase, 115–230 V / 6, 12, 24 V AC, 1 A |
| Ammeter | Moving iron, 0.5–1 A |
| Voltmeter | Moving iron, 25 V |
| Rheostat | Linear, 100 ohm, 25 W |
| Resistors | 10, different values |
| Diodes | 4 x 6 A, 100 V |
| Capacitors | 1 x 100 microfarad and 2 x 500 microfarad, 25 V DC |
| Inductances | 2 x 60 mH, 0.5 A |
| Relay | 2 exchange contacts, 24 V AC coil |
| Power source | 220–230 V AC, 50 Hz, single phase |
About This Product
Students build circuits on the panel with the 4 mm plug cables and use the meters to confirm the laws and principles covered in theory. The mix of resistive, capacitive and inductive parts, together with lamps, buzzer, push-buttons and a relay, gives grounding in electrical engineering, installation circuits and electric measurement. Colleges and TVET centres in Montenegro, Saudi Arabia, Haiti, Fiji, Qatar and Seychelles can source the Electrical Circuit Trainer from Educational Lab Equipments.
Frequently Asked Questions
What does the Electrical Circuit Trainer teach?
It gives knowledge of electrical engineering, electrical installations and electric measurements, and is used to check the main laws and principles of circuits.
What meters are fitted?
A moving iron ammeter with a 0.5–1 A range and a moving iron voltmeter with a 25 V range.
What power does it need?
220–230 V AC, 50 Hz, single phase. It has a general switch, fuse and signalling lamp, and two fuse holders with 6 x 30, 1 A fuses.
Related: Electronics Engineering Lab Equipments, Electrical Circuit Fault Trainer, Basic Electricity Circuit Lab, Electrical Machine Trainer.
For a quotation on the Electrical Circuit Trainer, contact Educational Lab Equipments.
