Disc Sander Belt Manufacturer,Supplier and Exporter in India
Product Code : EL-WWM-11713
Quick Answer: The Disc Sander Belt is a combination machine with a 4 x 36 inch sanding belt and a 6-inch sanding disc, driven by a 120 V motor rated 1/2 HP (3/4 HP peak). Its cast aluminium table tilts from 0 to 60 degrees and can be moved to serve either the belt or the disc.
Last updated: October 2026
Key Features
Belt sander for 4 x 36 inch belts at 1150 FPM, adjustable for flat work and inside and outside curves.
6-inch disc sander at 1780 RPM for smaller workpieces.
Cast aluminium table and disc; cast iron motor housing.
Table tilts 0–60 degrees; mitre gauge swings 0–60 degrees left and right.
Toggle switch; 120 V, 1/2 HP rated (3/4 HP peak).
80 grit sanding belt and 80 grit sanding disc included.
Technical Specifications
Specification
Value
Sanding belt
4 x 36 in, 1150 FPM
Sanding disc
6 in, 1780 RPM
Motor
120 V, 1/2 HP rated, 3/4 HP peak
Table tilt
0–60 degrees
Mitre gauge
0–60 degrees left/right
Construction
Cast aluminium table and disc, cast iron motor housing
Overall dimensions
24-3/4 in H x 15 in W x 14 in D
Weight
37.5 lb
Abrasives included
80 grit belt and 80 grit disc
About This Product
Flat faces and curved edges are worked on the adjustable belt, while small parts are trued up on the disc using the table and mitre gauge. Moving the table between the 2 stations lets one bench machine handle both kinds of sanding.
Frequently Asked Questions
Which abrasives come with the machine?
One 80 grit sanding belt (4 x 36 inch) and one 80 grit sanding disc (6 inch).
Can the table be used with both the belt and the disc?
Yes. It tilts from 0 to 60 degrees and can be repositioned for use with either the belt or the disc.
What does the machine weigh?
37.5 lb, with overall dimensions of 24-3/4 x 15 x 14 inches (H x W x D).
