Condensation Polymerization Reactor Manufacturer,Supplier and Exporter in India
Product Code : EL-TWL-11794
Quick Answer: The Condensation Polymerization Reactor is a jacketed stainless steel reactor of about 1 litre with variable speed agitator, baffles and nichrome heaters, used for condensation polymerisation under batch conditions. A condenser with a Perkin triangle collects the condensate.
Last updated: October 2026
Key Features
Jacketed stainless steel reactor, approx. 1 litre, with variable speed agitator and baffles.
Nichrome wire heaters with digital temperature controller.
Concentric tube condenser with Perkin triangle for collecting condensate.
Feed added from the top through a funnel with SS ball valve; top cover removable for cleaning.
Metered nitrogen from a cylinder admitted to the reactor; sampling ports provided.
Double-wall stainless steel water bath with ceramic wool insulation.
Technical Specifications
| Specification | Value |
|---|---|
| Reactor | Stainless steel, approx. 1 litre |
| Heater | Nichrome wire |
| Stirrers | 2, stainless steel impeller and shaft with motor |
| Condenser | Concentric tube type |
| Water bath | Stainless steel, double wall, ceramic wool |
| Floor area | 1.5 x 1 m |
| Nitrogen connection | 1/4 in BSP female, with pressure regulator |
About This Product
The reaction may be acid catalysed or self-catalysed, and the set-up measures both the extent of reaction and the rate constant. Vapours pass into the condenser shell while cooling water runs through the tube, and the condensate is collected. Students compare runs with and without an acid catalyst to study condensation polymerisation kinetics in an isothermal batch reactor. Colleges and TVET centres in Togo, Eritrea, Laos, Angola, Albania and Cabo Verde can source the Condensation Polymerization Reactor from Educational Lab Equipments.
Frequently Asked Questions
Can the reaction be run without a catalyst?
Yes. The polymerisation can be acid catalysed or self-catalysed, and the objectives include calculating the rate constant and extent of reaction with and without an acid catalyst.
What utilities are needed?
A single-phase 220 V AC, 50 Hz supply with 5-15 A combined socket and earth, water, 1.5 x 1 m of floor area, and a high purity nitrogen cylinder with regulator and 1/4 in BSP female connection.
Related: Training Workshop Labs, Emulsion Polymerization Reactor, Isothermal Batch Reactor, Adiabatic Batch Reactor.
For a quotation on the Condensation Polymerization Reactor, contact Educational Lab Equipments.
