Hydraulic Puller Manufacturer,Supplier and Exporter in India
Product Code : EL-MMTM-11945
Quick Answer: Self-contained, with its pump and cylinder built together, the Hydraulic Puller needs no separate pump or hose and gives a 50 mm stroke, 200 mm spread and 140 mm reach. Its pump rotates through 360 degrees so the puller can be worked from the most convenient position.
Last updated: October 2026
Key Features
Stroke 50 mm, spread 200 mm, reach 140 mm.
Pump rotates 360 degrees for flexible positioning.
Pump and cylinder in one compact unit, with no separate pump or hose.
Heat treated, hard chrome plated piston rod.
Heat treated forged alloy steel jaws.
Converts between 2-arm and 3-arm use; integral release valve prevents overloading.
Technical Specifications
Specification
Value
Stroke
50 mm
Spread
200 mm
Reach
140 mm
Jaws
Forged alloy steel, heat treated
Piston rod
Heat treated, hard chrome plated
Arms
Convertible, 2 or 3
Retraction
Spring
About This Product
Because the pump and cylinder form one unit, the puller can be taken straight to the job without hoses to connect. After a pull, the simple release valve lets the spring retract the piston rod quickly and smoothly, and changing from two arms to three gives a more uniform pull.
Frequently Asked Questions
Does the Hydraulic Puller need a separate pump?
No. Pump and cylinder are combined in one self-contained unit, so no separate pump or hose is required.
Can it be used with three arms?
Yes. It converts easily between a 2-arm and a 3-arm puller; the 3-arm set-up gives a more uniform pull.
What are the jaws made of?
Forged alloy steel, heat treated. The piston rod is also heat treated and hard chrome plated.
