Electro-Hydraulic Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-11745
Quick Answer: The Electro-Hydraulic Trainer pairs a hydraulic power pack (2 HP motor, 20 litre tank, about 40 bar) with solenoid and manual valves, two double-acting cylinders, a gear motor and an 8051-based electronic controller for manual or automatic circuits.
Last updated: October 2026
Key Features
Power pack: geared pump on a 2 HP, 220 V AC, 50 Hz induction motor, mounted over the tank on anti-vibration pads, with non-return and pressure relief valves.
Operating pressure approx. 40 bar, flow rate approx. 4–8 lpm, tank capacity 20 litres.
Valves: 4/3 double solenoid and 4/2 single solenoid (AC), 4/3 hand lever, flow control and pressure reducing.
Two double-acting cylinders, 100 mm stroke and 32 mm diameter, with chrome-plated, hardened piston rods.
Bi-directional hydraulic gear motor; three 0–1500 psi pressure gauges plus glycerin-filled gauges at the input line.
Controller: 220 V AC, 8051 CPU with 64 kB flash, USB, manual/automatic solenoid switches, push buttons and DOL starter.
Technical Specifications
| Specification | Value |
|---|---|
| Motor | 2 HP, 220 V AC, 50 Hz induction |
| Operating pressure | Approx. 40 bar |
| Flow rate | Approx. 4–8 lpm |
| Tank capacity | 20 litres |
| Cylinders | 2, double acting, 100 mm stroke, 32 mm diameter |
| Pressure gauges | 0–1500 psi, 3 nos |
| Hoses | 3/8 inch connection, 600 mm (15 nos) and 1000 mm (2 nos) |
| Controller | 8051 CPU, 64 kB flash, USB |
| Power requirement | 220 V AC +10%, 50 Hz |
| Weight | Approx. 65 kg control unit, 70 kg power pack |
| Dimensions (L x B x H) | 900 x 380 x 670 mm |
About This Product
Students study the hydraulic components one by one, then extend and retract the double-acting cylinders in different ways: with the hand lever valve and flow control valve, with the single solenoid valve and flow control valve, or automatically under the microcontroller. The direction of the hydraulic motor can be reversed through the double solenoid valve by hand or from the controller, and reduced pressure lines are provided at cylinders 1 and 2.
Frequently Asked Questions
What experiments can be done on the Electro-Hydraulic Trainer?
Study of hydraulic components, extension and retraction of a double-acting cylinder in different ways, and direction control of the hydraulic motor with a double solenoid valve, manually or through the microcontroller.
What are the power pack's pressure and flow?
Operating pressure is about 40 bar and flow rate about 4–8 lpm, from a geared pump driven by a 2 HP induction motor over a 20 litre tank.
How heavy is the trainer?
The main control unit weighs about 65 kg and the hydraulic power pack about 70 kg.
Related: CNC Trainer Machine, Hydraulic Trainer Kit, Electro Pneumatic Trainer.
For a quotation on the Electro-Hydraulic Trainer, contact Educational Lab Equipments.
