Multi-cylinder Engine Test Beds Manufacturer,Supplier and Exporter in India
Product Code : EL-EAMM-11568
Quick Answer: Multi-cylinder Engine Test Beds couple the engine directly to a dynamometer through an inertia-matched drive shaft, with both mounted on one frame that runs on wheels. Full and part load runs produce power, torque, fuel efficiency, volumetric efficiency and brake mean effective pressure plots.
Last updated: October 2026
Key Features
Engine coupled straight to the dynamometer by an inertia-matched drive shaft.
Fixed guards over all rotating parts.
Drive shaft guard interlocked with the Emergency Stop circuit.
Common mounting frame for engine and dynamometer.
Wheeled frame so the test bed can be moved.
Oil and coolant flow rate and temperature change measured.
Technical Specifications
| Specification | Value |
|---|---|
| Coupling | Direct, inertia-matched drive shaft |
| Guarding | Fixed guards; drive shaft guard interlocked with Emergency Stop |
| Frame | Mounting frame for engine and dynamometer, on wheels |
| Outputs | Power, torque, fuel efficiency, volumetric efficiency and BMEP plots |
About This Product
The test beds measure engine parameters across full and part load and turn them into power and torque curves, fuel efficiency and volumetric efficiency plots, and brake mean effective pressure plots. Oil and coolant are monitored for flow rate and temperature change during the run. If the drive shaft guard is removed or opened, the interlock with the Emergency Stop circuit prevents the engine from being used. Educational Lab Equipments can supply and export the Multi-cylinder Engine Test Beds to Belize, Portugal, Bangladesh, Panama, Croatia and Dominican Republic.
Frequently Asked Questions
Can the engine run with the drive shaft guard open?
No. The drive shaft guard is interlocked with the Emergency Stop circuit, which prevents use of the engine when the guard is removed or open.
Can the test bed be moved around the lab?
Yes. Engine and dynamometer share one mounting frame, and the frame is fitted with wheels so the test bed can be moved easily.
Which results can be plotted?
Power and torque curves, fuel efficiency plots, volumetric efficiency plots and brake mean effective pressure plots, plus flow rate and temperature change for oil and coolant, all at full and part load.
Related: Engines and Machines Models, Multi Cylinder Engine Test Bed With Remote Control, Single Cylinder Engine Test Bed, Automotive One Engine Test Set.
For a quotation on the Multi-cylinder Engine Test Beds, contact Educational Lab Equipments.
