Wave & Antenna Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-EELE-11285
Quick Answer: The Wave & Antenna Trainer measures antenna characteristics and propagation at 914 MHz and 2.45 GHz, turning the antenna under microcontroller control through 360 degrees in 400 steps.
Last updated: October 2026
Key Features
Mobile communication propagation experiments, propagation modelling and loss simulation.
Antenna characteristics measurement with automatic position calibration.
RF frequencies of 914 MHz and 2.45 GHz, output power +4.5 dBm.
PLL local oscillator, 21.7 MHz IF and 40 dB AGC dynamic range.
Antennas: Yagi, chip, dipole, monopole, loop, patch, inverted F and array patch.
Motorised rotation front, back or step, 0 to 360 degrees in 400 steps.
Technical Specifications
Specification
Value
RF frequency
914 MHz, 2.45 GHz
Output power
+4.5 dBm
IF
21.7 MHz
AGC dynamic range
40 dB
Impedance
50 ohm
Antenna angle control
0 to 360 degrees, 400 steps
Local oscillator / control
PLL / microcontroller
About This Product
Students mount one of the antennas, let the microcontroller rotate it step by step and record how the received signal changes with angle. The same setup supports propagation modelling and loss simulation, so radiation behaviour and path loss can be studied together.
Frequently Asked Questions
Which antennas come with the Wave & Antenna Trainer?
Yagi, chip, dipole, monopole, loop, patch, inverted F and array patch antennas.
How is the antenna rotated?
A microcontroller drives the motor front, back or in steps, covering 0 to 360 degrees in 400 steps, with automatic position calibration.
What frequencies does it use?
RF at 914 MHz and 2.45 GHz with +4.5 dBm output power, a PLL local oscillator and an IF of 21.7 MHz.
