Logic Training Board Manufacturer,Supplier and Exporter in India
Product Code : EL-EELE-11308
Quick Answer: The Logic Training Board gives 3-input AND, NAND, OR and NOR functions and buffer outputs built from NAND, NOR and NOT gates, with switches to select logic states and LEDs to show them. A +5 V DC, 500 mA IC-regulated supply is connected inside.
Last updated: October 2026
Key Features
Two 3-input NAND gates followed by an inverter, giving 3-input AND/NAND.
Two 3-input NOR gates followed by an inverter, giving 3-input OR/NOR.
Two NOT gates followed by another NOT gate to give BUFFER outputs.
Logic selection switches and LED status indicators.
+5 V DC, 500 mA IC-regulated supply connected internally.
Patch cords with 4 mm spring-loaded plugs, half a metre long.
Technical Specifications
Specification
Value
Gates
2 x 3-input NAND, 2 x 3-input NOR, 2 x NOT, with inverters
Supply
+5 V DC, 500 mA, IC regulated
Mains
230 V +/-10%, 50 Hz AC
Weight
About 3 kg
Dimensions (W x H x D)
340 x 110 x 210
About This Product
Students wire the gates with patch cords, set inputs on the switches and read the outputs on the LEDs, building a truth table for each function. Adding an inverter after a NAND or NOR gate shows how AND and OR are formed, and two NOT gates in series show how a buffer works. The Logic Training Board can be dispatched from India to Colombia, Senegal, Niger, São Tomé and Príncipe and Mexico.
Frequently Asked Questions
Which logic functions can be studied on the Logic Training Board?
3-input AND, NAND, OR and NOR functions, plus BUFFER outputs made from NOT gates in series.
What power does it need?
It runs on 230 V +/-10%, 50 Hz AC mains and feeds the circuits with +5 V DC at 500 mA from an internal IC-regulated source.
