Model of Sedimentation Tank Manufacturer,Supplier and Exporter in India
Product Code : EL-EELE-11390
Quick Answer: The Model of Sedimentation Tank feeds a slurry of known concentration under an inlet weir into a 1000 x 400 x 200mm settling tank, so settling can be studied and checked by Imhoff cone or by drying and weighing.
Last updated: October 2026
Key Features
Settling tank 1000 x 400 x 200mm with an inlet weir for uniform entry.
120-litre sediment sump kept agitated by a flow sparge device.
Slurry pumped through its own flow meter, 0-2 l/min, into the fresh water stream.
Water flow meter, 0.5-5 l/min.
Pump giving 25 l/min at 5 m head, with a 0.1 kW motor.
Technical Specifications
Specification
Value
Settling tank
1000 x 400 x 200mm
Sediment sump tank
120 litres
Water flow meter
0.5-5 l/min
Suspension flow meter
0-2 l/min
Pump
25 l/min at 5 m head
Motor
0.1 kW
About This Product
Slurry made up in the sump is kept in suspension by the sparge, then metered into the fresh water just before the settling tank, so both concentration and flow at the inlet are known. Results can be compared with an Imhoff cone or, for more accuracy, by drying and weighing. The Model of Sedimentation Tank can be dispatched from India to Turkey, Oman, Seychelles, Dominican Republic, Iceland and Latvia.
Frequently Asked Questions
How is the slurry kept from settling in the sump?
The 120-litre sump tank is continually agitated by a flow sparge device throughout an experiment.
How are results analysed?
Comparatively by the Imhoff cone technique, or more accurately by drying and weighing.
