Forced Draft Tray Dryer Manufacturer,Supplier and Exporter in India
Product Code : EL-EELE-11370
Quick Answer: The Forced Draft Tray Dryer dries a sample on a tray hung from an electronic balance inside an insulated double-wall chamber, so weight loss can be followed as blower-driven hot air sweeps across it.
Last updated: October 2026
Key Features
Insulated double-wall drying chamber.
Tray linked directly to an electronic weighing balance mounted on top, outside the chamber.
Blower pushes air through a heating chamber; hot air enters one side and leaves the other.
Digital temperature controller sets and displays air temperature.
Arrangement to vary and measure the airflow rate, with an anemometer for air flow.
Technical Specifications
Specification
Value
Chamber
Insulated, double wall
Weighing
Electronic balance, fitted outside the chamber
Air temperature
Digital temperature controller
Electric supply
230 +/- 10 VAC, 50 Hz, single phase, earthed
Sockets
5 A for weighing scale, 15 A for heater
Test material
Saw dust, about 1 kg
About This Product
Because the balance reads the tray throughout the run, students can log the fall in weight against time for different air temperatures and flow rates. The set-up illustrates moisture removal by heat under forced draft, with saw dust as the trial material.
Frequently Asked Questions
How is the drying rate followed?
The tray inside the chamber is attached to an electronic weighing balance on top of the chamber, so the loss of weight of the material can be monitored at regular intervals.
Which electrical points are needed?
A single-phase 230 +/- 10 VAC, 50 Hz earthed supply, with a 5 A three-pin switched socket for the weighing scale and a 15 A three-pin switched socket for the heater.
